WOL 3D 3D Printer Enclosure Big: Safe, Quick and Easy installation…

I've been using this WOL 3D Creality Ender 3 Pro model for over a year now.The 3D printer came in a Semi assembled form (means all the electronics were already assembled on the base... we just have to raise the pillars and it's attachments. It was easy to follow the instructions sheet in the beginning and most part of it... but few steps were tricky. I would suggest people to watch Assembly videos online when assembling, especially the printing head.Magnetic Surface Plate is good. It doesn't need any extra clamping and its flexible enough to easily remove the prints. The temperature is consistent through out the surface. The surface plate gets to the required temperature within 3-5 mins.We any power cut happens, the Resume Print function works well too... Just make sure to stick masking tape to the base so that the print doesn't come out.The SD card provided contains the easy-to-use 3D printing Cura software and a couple of 3D models to test the printer after assembling.The software to is easy to understand and use. Lots of YouTube videos are available for understanding the software too. It would be good if the software highlights if any discrepancies are present on a 3D Scanned models.The only time taking process is levelling the surface plate. Take as much time as required to level it to get a great print.The Customer support is also commendable as they are resolving any issues we face instantly or at the earliest.In short - Good printing quality, reasonable cost for the beginners and good performance for the enthusiasts.P.S. Place the printer in a ventilated area when using ABS filament and follow the temperature settings mentioned on the spool for any type of filament you buy.I'm planning to get the self-levelling and laser module next for my WOL 3D Creality Ender 3 Pro model.

This is the best printer for the money we pay. But it lacks support in India.Installation and packing: The packing was nice, and I could install this within an hour. At some point, you may need to refer youtube for assembly.Build: The build quality is decent not that robust, but it will do the work. Make sure to check Bed alignment as it's always not the right alignment.Printing: Quality of prints comes very well. Mind that an average time to print for a 2"x2" would be around 2 hours.Board: It has The Creality 4.2.2 board with a boot loader.Support: Unfortunately, after 2 print, my printer went dead. I tried calling Amazon; they said it could only be refunded, and they had no support details from India.I sent a mail to Creality support but didn't get any reply from them. Their support phone number is from China.I fixed the issue by flashing the official firmware. You can download it from the Creality site and just past the .bin file on the SD card and plug it into the printer.I highly recommended flashing to new official firmware as the firmware which comes with the Printer is really old. I could see the difference in print quality and the more important printing speed; it improved slightly.

Pros:1.Good 3d printer with all necessary items bundled. Works perfectly fine with official firmware with highly quality prints2. Custom firmware also works wellCons:1. We need to do extra cooling mods to get higher printing speed and few physical upgrades for klipper use.2. This is con of my printer which comes with different display manufacturer TJC, who have few comparability issue with professional custom firmware (some what ignorable)

The media could not be loaded.  After using this product for 3-4 days, this is my experience. The product is good quality, everything required was in the box. Quick and easy delivery by Amazon as always. Assembly was easy and we'll instructed in videos provided in the SD card. Now let's see the cons.The printer was in good shape and worked straight away. The problem was the built plate. It is warped in the middle. So even after leveling all 4 corners perfectly with the paper test, the center still rubs hard against the nozzle.Now I spent 2 days trouble shooting it, from what I found, the actual bed is perfect only the built plate is warped. So as anyone would do, I contacted Wol3D for help. Now here's how it went.The first thing they said after I explained them the problem was "Warping is not possible". And their solution was using glue sticks. From this I understood, these people have no idea of what the are talking about.After providing the video(added in this review) demonstrating the problem, they asked me to make a hole in the center to let out air. Now this is reenforced fiber bed, you can't just use a pin to make hole in it. I did contact offical group of Creality for suggestions and there they asked me to replace the plate as making a hole was not the solution.So obviously I asked for a replacement bed. And these people straight up blamed me for warping the bed. After some talk they said the bed was not under warranty and they can't help me.So now I have ordered a new bed from other seller.My advice to you is, buy from a better seller. These people don't know anything about 3D printing.

I love this printer. It produces higher quality prints than older generation Creality printers I've used before. It prints fast and it comes with wifi; which is convenient but can only be used with creality's software. I've had it with Creality Print though as it is a terrible software that crashes frequently and cost me many failed prints. I've since switched to the Cura slicer and now get perfect prints every time with this printer.

Excelente, antes do prazo e produto lacrado.

As with any "new" product their is a learning curve! This product was not different, but with help from supplier and youtube videos I was able to resolve some frustrating issues. The printer is working with no faults and I have noticed items are coming away from the glass bed with relative ease.Very satisfied with the Ender Max Neo and will continue to support this supplier.

The media could not be loaded.  Assembly is super easy it was a little difficult to line up the holes to screw it together but others no issues. I'd suggest watching a tutorial on YouTube for clear instructions. The manual is helpful but It is vague on some of the setup. As far as printing goes once I leveled the bed properly my test prints came out flawless! This is my first experience with anything 3d related and I am very happy I started with this printer. The automation takes away alot if my stress. Once again I highly advise watching YouTube tutorials for assembly and print setup! The bed is super adhesive, I had to level my bed initially because it wasn't sticking, but that's operator error not printer error. I thought I'd want a touch screen but so far using the knob is super easy. Would recommend for any beginner.

The Creality Sermoon V1 3D Printer is one of the best to buy and use for home or office or small business. The app is so easy to set up use make money with. Custom Cars USA hase the Creality Sermoon V1 3D Printer on there Amazon Store and its the best selling 3D printer. Grate looking printer in my Home Office.The printer is a must for Youtubers that are makers wanting to get into 3D printing.