2 x Replacement Analogue Analog Sticks Thumbstick for Gamecube Controller

Just what I needed after my controller lost a joystick somehow

the feel of the sticks is surprisingly close to oem sticks however the fit is pretty off. for starters the analog stick has no notch to help it clear a solder point on the board which can cause it to not lock into the notches and it also sits too low on the stick causing it to not lock into the notches as well, as a fix i took a finger nail file and filed out a notch to match the oem and then i took a piece of paper and put a just enough to make up for the lack of plastic inside the whole of the stick. now after a few speedruns i can say it seems pretty close to an oem, at least enough to get the job done for precise movement and aiming. so if you purchase this i highly recommend doing this

amazing

Cheap and works, but it only lasted a month or 2 before the rubber was smooth and falling off

Cheap, thin plastic, no rubber on c stick. Incompatible with GameCube controller stick mounts. Thanks for the garbage recommendation Amazon.

It's hard finding decent stick cap replacements. In this case the C-stick is almost useless imo, so don't buy this just for the c-stick. The 100% plastic feels terrible compared to the OEM rubber-tipped c-sticks, just a tiny bit of sweat and you'll slip right off it.The Left analog stick from here is decent but not perfect; the mold has the visible cutout on the dome part like OEM sticks do so it doesn't bump into solder on the logic board, but it lacks the very tiny cutout notch on the underside where the cap slides into the controller stickbox, making it a bit tough to line up at first. Once it's installed the stick feels okay, but like most 3rd party stick caps it's a tad bit too big, so it makes almost a scraping sound when you click back and forth as it runs slightly against the shell. It's not anything crazy, definitely not enough to cause misinputs or change the feel much, it's just a tiny bit of noise and a bummer that nothing fits as perfectly as OEM caps. Gets the job done though, thankfully they rubberized the tip of the Left stick.

I bought these to modify my switch pro controller and with a little bit of carving, they fit great.

Exactly what's advertised. Third party pieces. Works well to replace worn out parts and to keep controllers looking original