ICEPURE Under Sink Water Filter System, 3 Years or 22000 Gallons Ultra High Life NSF/ANSI 42 Certified, Removes Heavy Metals,Chlorine,Direct Connect Under Counter Drinking Water System, USA Tech

I recently purchased and installed the ICEPURE Under Sink Water Filter System and have been thoroughly impressed. The main selling points for me were the claimed three-year lifespan and the ease of installation, and the product has delivered on both fronts. Installation and Setup One of my biggest concerns was the installation process, but the "plug-and-play" design made it incredibly simple. The system comes with clear instructions, and I had it hooked up and ready to use in under [e.g., 15 minutes, half an hour]. There was no need to hire a plumber or mess with complicated tools, which was a huge relief. The direct-connect feature is fantastic as it allows you to use your existing faucet, saving you from drilling an extra hole in your countertop. Performance and Water Quality The change in water quality was immediately noticeable. The filter is NSF/ANSI certified, which gave me confidence in its ability to remove contaminants. The most significant improvement I’ve seen is in the taste and smell of my water. The chlorine taste that was previously present is completely gone, and the water is now crisp, clean, and refreshing. It's a noticeable difference not just for drinking, but also for cooking and making coffee. Long-Term Value The claim of a 3-year or 22,000-gallon filter life is a major advantage. This means less frequent filter changes compared to other systems, which saves both time and money in the long run. Knowing that I have a reliable, long-lasting filter for my daily drinking water gives me peace of mind. The high flow rate is also a great feature; there's no noticeable slowdown in water pressure. A Few Minor Points While my experience has been overwhelmingly positive, there are a couple of things to keep in mind. The system is designed for cold water lines only, so it's important to be aware of that during installation. Additionally, as with any new filter, you'll need to run the water for a few minutes to flush out any harmless carbon fines before use. Final Verdict The ICEPURE Under Sink Water Filter System is an excellent investment for anyone looking for an efficient, hassle-free, and long-lasting water filtration solution. It's easy to install, improves water quality dramatically, and offers great value with its extended filter life. I would highly recommend this product to anyone wanting to upgrade their home water quality without the need for a complex and costly system.

Easy install. They provided everything right down to the teflon tape! All I needed was a 3/8” water T splitter and a wrench. Added a dedicated faucet and voila! Filtered water spigot! I was immediately impressed by the flow rate. I added the extra faucet because I didn’t want to see a pressure drop in my cold water line when I was washing dishes and such. At 2.5 gpm, I’m pretty certain I wouldn’t have noticed. My second thought was “well if it’s flowing that fast, it can’t be filtered that well…” Now I don’t have fancy test equipment at my disposal- but my city has a LOT of chlorine smell and taste in our water, and it was GONE. The water has zero taste and zero smell. I’m going to give this one 5 stars Chet!! Great buy. Definitely recommend.

Works great -the tap water used to come out brown and now its coming out clear (finally!). Its easy to install under the kitchen sink (thats where we are using it, although you could also put it under the bathroom sink) and the water is tasting so much better now! I dont know how long it will last, it says 22000 gallons which seems like alot, however we are a family of 3 so it might not last as long, however for the cost, its of great value because a full house system would be sooo much more!

I love the design and ease of installation. I had it installed in under 30 minutes even working under the sink. The design is great with flexible water lines on the inlet and outlet of the filter to easily install between the shutoff valve and the faucet. I didn't even use the mounting screws as I let the filter housing just sit in the back corner under the sink. Filter replacement will be a snap. But mounting it would be easy with just 2 screws. I just chose not to do I could save space by putting it back in the corner, saving the front space for storage. How refreshing to get a product with clear instructions, ease of installation and good quality of product. I put this in because my refrigerator water system sticks in the open position so I can't use it. This made an easy way to fix the problem and the filter is much higher capacity. Now I have filtered water for cooking and drinking.

I recently moved to a city with city-supplied water, and noticed the taste was not good. I tested the tap water (using test strips) and some of the 16 items tested for were slightly elevated, but all within EPA requirements. Still, the taste was not good, I assume due to disinfecting chlorine. So I bought the IcePure under-sink filtration system. INSTALLATION The installation user guide (which was attached to the product page) looks professional and thus complete. But I found the installation instructions insufficient, for two reasons: 1. While they advise/require at least four inches under the filter (due to future filter replacement), they don't advise how much space to leave on either side of the filter. To avoid bending the inflow and outflow lines too much, I recommend at least four inches on the sides. 2. The filter and the wall mount ("filter head") arrive attached. After you drill the two holes for the filter head, make your life easier by detaching the filter from the wall mount, and take the top of the wall mount off (it easily snaps off) to expose the wall mount's attachment holes. Then put the wall mount on the screws and make the screws snug. And reattach the filter. Note that once the wall mount and filter are secured under the sink, the plumbing work is fairly easy (although there's limited space usually under the sink to work within). If you've ever replaced a kitchen faucet, this installation is much easier. I did use the supplied teflon tape on my connections even though the instructions did not call for it. WATER QUALITY I tested the filtered water, and it brought down some of my tested values. Based on the EPA limits (there aren't that many...), I believe the tap water is safe to drink, so the IcePure filtered water should be safer. The taste is also much better than the unfiltered tap. WATER FLOW This wasn't a factor when I looked at water filters, but the flow rate is indistinguishable from the flow rate before I attached the water filter. Much appreciated! CUSTOMER SUPPORT After I installed the water filter, I emailed their support group, and asked two questions: 1. What are the included stickers for? (There are twelve monthly stickers, and stickers numbered 1 ro 31, presumably days.) Customer support reply: "You can contact Amazon to return the product within 30 days of using it." Huh? 2. How will I know when to change the water filter? Customer support reply: "According to our experience, if the filtered water tastes bad and the water flow is significantly reduced, we think it is time to replace the filter." Helpful. Overall, the IcePure water filter is a clear improvement over my city's tap water. As long as the filter lasts a long time, I'll be a happy customer.

Easily installed no more chlorine smell anymore. Worth the money😊

I am very pleased with the Icepure water filter. It took about an hour to install with good instructions provided. After running the water for five minutes the bad smell was completely gone. My city water taste and smells like a dead animal but now it has very little taste and not offensive to my taste bubs.

Very easy to assemble, and so far works pretty goos, will come back and write another review after a few months.