Pacer Technology (Zap) Pacer Technology (Zap) Z-Poxy 30 Minute Set, 8 oz

It worked and it didn't set up quickly.. which is GOOD. I did use it on a cool temperature day with low humidity...

I have used this for years with good success.

Quality is great

I use the slower drying epoxy when batch gluing a large amount of pen barrels to pen blanks, the slower drying time allows me to mix a large batch of epoxy and work with a lot more pen blanks at-a-time.

Bought some of this to try as a finisher for some ABS 3D printing. For its primary use (i.e., sticking stuff together) it works great -- very good bond, very fast acting. I downgraded one star for two reasons: first, while I didn't see significantly better bonding results over other epoxies, this one has a far more irritating smell. The odor was incredibly noxious and persistent; I had to air out my workroom for two days. Second, while I like that the bond firms up very quickly, it's actually a bit too quick. I had to run a continuous cycle of mixing and applying small amounts. Still, it made a good bond.As far as an ABS "smoother," it works well in somewhat specific applications. First, I'll say that brushing this one works a lot better than other methods I've tried, both cold and warm acetone mists. However, I've found that it doesn't spread well over flat surfaces -- it tends to pool up, leaving dimples of uncovered surface. In a more rough or uneven model, such a sculpture of a face, it tends to cover better.

This product is exactly the I need to finish my project.

good unit great price durable Luthiers go to

Great epoxy that dries clear. The 30 minute working time is dead on with proper mixing of equal parts. It starts to really harden around 25 minutes then leaving seconds of working time. I set a timer to pace the work I needed for the batch to be sure I didn’t run too long.It’s thick material and nipping the bottle tips is worthless as it’s too think to squeeze out. Just unscrew the nozzles to dispense and start mixing with a popsicle stick.