BBDINO Silicone Mold Making Kit, 15A Fast Cure Silicone for Mold Making 2.2 lb(35 Oz), 1A:1B Ideal for Resin/Soap/Candle/Silicon Molds Casting

It's very important to note that since this is platinum cure the mixture cannot touch anything containing sulfur before it's fully cured, even tools that have touched tin cure in the past or anything containing sulfur, it will inhibit The cure. You must make sure that if you're setting in clay for a two-part mold it must indicate sulfur free... Even my "sulfer-free" Sargent Plasticina inhibited The cure, but that may be due to cross-contamination ***Also very important to note*** Most quick dry adhesives will inhibit The cure including super glues that contain cyanoacrylate and hot glue. Exposure to the adhesive side of most tapes including duct tape and electrical tape will inhibit the cure as well... So basically everything that I use, or have you used, to construct mold boxes and affix vent sprues. However, I'm still going to give this product five stars, simply because my failures have been due to compatibility issues. But this silicone is precisely what I've been looking for: ultra low viscosity to get in those teeny tiny nooks and crannies, extremely high flexibility to stretch and yank those little suckers out, so INCREDIBLY easy to mix and pour you could just bang out molds in seconds, an abnormally High potlife for such a QUICK cure time, and NOT ONE BASTARDLY BUBBLE COULD BE FOUND!!!! *UPDATE* Adhesives that can be used: hot glue, but it MUST be clear, CA/cyanoacrylate super glues, but the must be FULLY cured. I purchased some sticky wax adhesive, wax sprues, liquid sonite wax for coating porous mold box materials, and sculptex sulfer-free modeling clay. Also tried some srues i made from 2pt epoxy clay. All of the aforementioned worked beautifully! Now I have some super stretchy, tear resistant, molds that were a DREAM to pour! BEST PART... i cast them, along with 3 other previously made molds (different brands/types) all with ArtResin brand resin and BBDINO was the only mold to produce TACK FREE figures in 12hrs!

After testing several mold making products (both silicon based and others) This is by far the best one. Completely odorless, very easy to mix, separated easily from both the 3d printed model and later from the cast resin.

I had a non mold-making project that silicone rubber seemed perfect for. The BBDINO did not disappoint. The bottles were easy to open and easy to identify. I've never worked with silicone rubber before but this is the first 2-part anything I've used that didn't make me dizzy while working with it; no odor. It mixed and poured easily and was definitely set by the time I was able to check on it, 6 hours later. Thanks BBDINO!

It's super sturdy so it has that going for it but I learned a few things using this and probably won't purchase it again for the following reasons. I ended up with a lot of tiny little bubbles in the molds that I made with this product. I don't have a vacuum machine. The next product that I purchased to do the same thing recommended that you place the poured product into the refrigerator for a couple of hours after pouring before it starts to really cure and the molds I have created with that other product have no bubbles. If you're buying this, that method may work with this product, but I'm not sure. I don't think most people doing resin come to it with a ton of instruction or experience, so will be really nice if the product included detailed instructions and recommendations to set you up for success because in my opinion it's sort of expensive for trial and error. That said, I do think this product is significantly sturdier than the second product that I purchased and the molds made with it will probably get more mileage than with the clear product I purchased after I purchased this one. I do however use UV resin in some situations and the color or orange pigment in this product means the molds that I made with it aren't great for use with UV resin. So not bad but not the best and I probably will use a different product going forward. And I think better instructional materials would improve my perceived quality of this product.

This was the first time I've used a product like this, and it was simple & easy to use. For the pour I made a frame of some scrap plexiglass held together with hot glue (on the outside) and I was reproducing a simple shape I had cut out of wood. Neither the plexiglass nor the wood stuck strongly to the silicone, they released easily. The mold once set was solid, worked fine with epoxy resin (which also released easily), and even reproduced the wood grain on a spot I hadn't sanded down completely.

odorless but keep in mind it still does "off gas". use good ventilation. my studio is 20'x20' but i opened a window anyway it's a a bit thin so make sure your mold is tight

I was trying to mold some fruit pieces and I had one deeper mold and two shallow molds set up. I mixed the silicone up, and it goes together easily. Unfortunately I didn't have enough to mix the deepest mold which I tried first. So I poured it into the next deepest, and it still wasn't enough! SO I only got the most shallow out of the whole kit. It's been a long time since I tried making one of these. Great product but now I am torn if I should re-order or try to find something more cost effective.

The texture of my molds was perfect, the curing time was only five hours and I live in a tropical, hot, and humid island. The package instructions were clear and understandable, and everything was packed neatly. It is not sticky at all and all the shapes were perfectly formed, nothing sticks to the molds when I use them.

Wir vergeben 5 von 5 Sternen. Das Silikon lässt sich sehr gut verarbeiten und ist auch für Einsteiger gut geeignet. Das Mischungsverhältnis ist einfach umzusetzen und die beiden Komponenten lassen sich problemlos miteinander vermengen. Die Konsistenz ist angenehm flüssig, sodass sich das Material gut gießen lässt und auch feine Details sauber abgebildet werden. Nach dem Aushärten entsteht eine flexible, stabile und gleichzeitig formtreue Silikonform, die sich leicht entformen lässt. Besonders positiv ist die schnelle Aushärtung, wodurch man zügig weiterarbeiten kann. Das fertige Silikon ist elastisch, reißfest und eignet sich sehr gut für verschiedene Anwendungen wie Resin-, Seifen- oder Kerzenformen. Auch die mitgelieferten Zubehörteile sind praktisch und erleichtern die Verarbeitung zusätzlich. Insgesamt ein hochwertiges Set mit sehr guten Ergebnissen. Für die gebotene Qualität und die Menge ist das Preis-Leistungs-Verhältnis absolut in Ordnung. Klare Kaufempfehlung für alle, die eigene Silikonformen herstellen möchten.

making my own molds for resin work I've used BBDINO for a couple years now. Very easy to use (measure, mix, pour) and the molds last quite long. If you don't stir too hard while mixing it also stays pretty much bubble-free, if you get air in it it is very easy to de-gas. Good working time, easy clean up. I'll definitely keep using it

Gostei , rende muito , não tem cheiro .

I found this kit really easy to work with. The mix ratio is simple, the texture blends smoothly and there is enough time to get everything in place without feeling rushed. Once it sets, the silicone comes out flexible and strong, and it picks up small details really well. I used it to make a small mould of a glass plate for a craft project and the whole process went smoothly from start to finish. The quick cure time made it easy to keep the project moving. Overall, it worked just the way I hoped and made the experience straightforward.

BBDINO Silicone Mould Making Kit: I thought I would take my daughters crafting hobby to the next level by showing her how she can create her very own moulds. She found it really interesting after the initial confusion about how the item would come out looking. We have made moulds out of pens, a fork and a small toy so far. It is not difficult to work with and when I think about it, one of these will save me the cost of having to buy various moulds and toys if we can just create them ourselves. Therefore, its value for money.