Lisle 19702 8 Quart Dispenser With Lid And Cap

Dropped my 50s-era metal oil can damaging seams to point now leaking heavily. This 8qt Lisle is just inside ballpark of similarity. Spout is at top, metal can was at bottom. I can see the spout collar / nut breaking, looks like can be replaced with common nut used on sink continuous waste plumbing fixtures. So far, has held up through multiple oil changes. Don't like having to tip so far compared to old can, but also doesn't let oil flow if dropped fill spout either like on my old one. 2 oil changes, 15qts and 8qts, made me decide I needed something more again than using bottles. This plastic can works well. I foresee the raw plastic (ldpe / hope/ nylon) breaking down from being in UV from sunlight / fluorescent / mercury lights. Will be painting mine with a UV protectant or spray paint designed for plastics. You know which brand, starts with a K but not the planet Krypton. When painting, will be leaving strip along graduations to make it easier to fill. Old can was difficult to see level, as numbers started from bottom as 10, and top was 1. Must have been intended since spout was on bottom. This 8qt is much easier to see how much oil is inside to pour into engine, or on floor. 8qt Lisle also is resilient. Dropped mine with 6qts oil. Didn't fall on spout initially, but it did bounce up a few inches a couple times after oil content was sloshed across the floor. I don't think lid is intended to stay on, looks more like a dirt / dust cover. I'm sure it would have slowed the distance oil was thrown... if I was using it. Cost was higher than I wanted, but is somewhat of a niche product without resorting to watering can for plants. Unfortunately, metal cans cannot be found, but this plastic one approaches durability.

Excellent pitcher for measuring and dispensing oil for oil changes

This dispenser is a game-changer for my kitchen setup! 😍 With its 8-quart capacity, it holds a ton without taking up too much space. The lid and cap are super handy - no more spills or messes. It's just so sleek and modern in white, adding a nice touch to my countertop. I use it for all sorts of liquids, from cooking oil to water, and it works like a charm every time. 🙌 Plus, cleaning is a breeze! I just pop it in the dishwasher and it's good to go. I can't recommend this dispenser enough - it's truly a must-have for anyone who loves to cook or bake! 🌟

Works beautifully! Makes filling from bulk sources much easier with the quart and liter markings. The spout cap and lid are removable making it useful for just about every application! It's good quality plastic, does not deform easily, and the seal on the spout is nice and tight!

I watching a video and this guy used one of these to pour oil into his car and I decided to buy one and try and Ima tell you right now this thing made it 1000 times easier to pour oil into my 2022 GMC Canyon! it holds 6 quarts on the dot and so does this jug. put all the oil in it and ease the flex nozzle into the fill port and let it go, so much easier and no spills. i seen some reviews saying the nozzle would leak and mine don't so idk if they got a bad one or what but I didn't spill or leak a drop. cleans up easily and pours oil without spilling what more can you ask for?

Works great for holding a little less than 8 quarts. Anything over 7.5 it really likes to splash around. Included lid disappeared into the void after a week, but very happy with how fast it pours. Easy to clean with solvent, just a rag and some brake clean. Only gripe is with the included flex nozzle. works great for pouring into valve covers that block direct overhead access but likes to hold some residual oil from the design of the neck. Makes a little bit of a mess. Owned one of these for 5 years before it left with a customer’s vehicle, hoping for another 5 years of great usage!

Pricey but great quality. It’s going to last. Others have mentioned the leaking spout attachment, don’t plan to keep or use it myself.

I got tired of always trying to find the perfect funnel to put oil in my engines. Cars are pretty straight forward usually, but try to put oil in tractors or industrial and lawn equipment and that opens another can of worms. It seems with that kind of equipment they package everything around the oil drain and the oil fill. I can't do anything about the drain but this oil dispenser covers all of my oil filling needs. This works very well and the end of the installation tube fits everything I own and I don't need a funnel at all. The container is graduated and you can leave oil in it and keep it clean since there are covers that make the dispenser air tight. These things come straight from the 50's and 60's, but no one has yet made any kind of suitable replacement for what this design does so well.

Great high capacity oil fill. Seems pretty accurate as far as I can tell and the long spout helps when you don’t have a funnel handy

Pro: la graduación/medición es lo suficiente exacto, el volumen permite el llenado 'en un jalon' de la gran mayoría de los motores. Contra: El cuello es muy rígido y se opone a flexionarlo .

le faltaba la tapa roscada, no estaba completo

Great jug! Doesn't leak.

I looked at using a large capacity juice/water jug for my oil changes and was easy to pore, but I needed one that could hold about 6 litres. The prices of them on here was ridiculous, I mean it's just plastic right!! But then I came across this jug here, I read the reviews on it and decided to give it a try. I have to say that all and all it works pretty good. I just changed the oil on a Acura RDX and it's difficult to get a funnel into the oil add port on the motor. The spout that came with this jug worked great, it reached the hole with not much problem at all. I seen some reviews on here complaining that the spout leaked where you thread it onto the jug. But I never had that problem, I suspect that the people complaining about it leaking were using the jug for a liquid that was thinner than oil.