XtremepowerUS Wall Chaser Cutting Machine Wall Concrete Grooving Cutting w/Water Line Dust Port Infrared Sighting (Slotting Machine)

As you can see from the pictures this machine will allow you to cut channels in Concrete to approximately 1.5“ x 1.5“. Needless to say if you use the blades dry, you will have to have a dust collection system and realize that cutting dry destroys the blades. If you use a wet system with the included water pump in a bucket, prepare for major cleanup afterwards, as you will create a ton of slurry. Also this cuts through concrete and leaves behind concrete tabs that need to be broken off by a chipping hammer and clean up the bottom of the channel . The most important thing to remember is that you cannot use this machine on a standard 15 amp outlet the minimum required is a 20 amp breaker and even with that it will trip multiple times as the idle speed uses 18 A and when you cut the concrete, you can easily go over 20 A depending on how many blades are in the machine. Another negative is that the 5.25 inch concrete blades with a 20 mm arbor are impossible to find. The manufacturer is not responsive when I contacted them about replacement blades. If you use 5 inch blades, then you lose 1/8 of an inch in depth. this is important because if you are trying to put a 1.5 inch pipe in the channel and you use a 5 inch blade, the pipe will stick out of the concrete. Overall happy with the machine and its price. Even if it ends up being just a one time use, it paid for itself.

Great quality tool and durable and reliable water pump is a must and laser works great is a lil heavy but do a great job

Excelente Bien Potente

Saw worked great, ate through the concrete like a champ! The instructions were hard to read, they could have used a better printer! Only real negative the top handle bolt is bent because it wasn’t placed in the case correctly and broke the inside of the case. Could use a new bolt for the top handle.

Muy buena

Excelente

It is a power house. I have channeled approximately 400 solid concrete blocks with this tool . Still cuts like new with the same blades that were included. I like the soft start where rpm builds up gradually. The sled (saw base) is the weakest part as it is has alittle too much flex. This can be remedied by drilling and tapping some aluminum stock into the bottom. It adds ridgidity and acts as a wear plate.

Folks this saw is the real deal. Very well put together and solid. I was surprised when I opened the case and felt how heavy it was. Did a great job cutting a grove in my concrete floor within a few minutes. There is a learning curve on getting the water pump dialed in. Too much you get water everywhere to little dust everywhere. Once you have it dialed in with the valve at the saw you are good. I did use a wet vac to catch some of the concrete chips. Also the laser worked well to keep in somewhat on track but did get covered at times resulting in having to clean it. I would recommend this tool hands down.

Excelente calidad, diseño sólido. Te ahorra tanto tiempo y trabajo, definitivamente recomendado al 100%

Machine wheels are tight, the wheels are loose, the wheels are stationary, the side machine is cutting, the wheels are company is froud

Ecxelente yo no me dedico a eso solo la compré para un pequeño proyecto es un poco pesada pero corta como mantequilla el concreto eso sí ensucia mucho

Muy buena máquina, lo que haces en una día con el método tradicional (esmeriladora, Sincelador, clavos, alambre) con la maquinita lo haces en 2 o 3 HRS, lo malo es que se sobre calienta, hay que darle su tiempo.

Demasiado pesado para hacer cortes en altura,hace mucho ruido al cortar.el kit para que humedescas el corte es muy molesto se dobla la manguerita el control de la bombita no es automático te queda lejos primero te mojas tu y después la pared