Navaris Protective Outdoor Camera Case - Hard Case with Customisable Foam Inserts - Water and Dust Equipment Protection - Size S (Black)

I was looking for a cheaper alternative to a Peli 1150 case that I was using to protect a laser level, as my level didn't need as much protection as a Peli offers but still needed to be protected and this fits the bill perfectly. The case is slightly smaller than a Peli 1150 by a few millimetres in each direction but not to the point where it's massively noticeable. This is essentially a slightly lower quality Peli case and I say slightly lower quality because there's really not much in it in terms of build quality. The plastic of both cases is around the same thickness and appears to be as strong on both. The only thing that lets this case down is a protruding nut that attaches the pressure purge valve but this is covered by the included foam when inserted. The foam itself is the same design as Peli's 'pick and pluck' foam although this is slightly thinner than Peli's version but doesn't cost extra as with a Peli product. I don't know if I'd trust this case to protect as much as a Peli case but if you're looking for a cheaper alternative to a Peli, which offers a good level of protection then this is a good option.

Good solid case, pick & pluck foam is easy to remove.

Having already bought the plain black one, I ordered this as the measurements were slightly bigger (length). Which I needed for a shotgun mic - Rode NTG For some reason, this is not the case (no pun intended) and both this and the Don't touch my case (graphic/sticker) versions are identical - Black only - 21.5x17x11cm Don't touch my case version - 23x17x11cm They are both identical, but the Don't touch my case is £1 cheaper, but again, exactly the same size as the plain black one. This was disappointing as the quality is good and value for money if you like to look after/store your items safely, but I needed that extra 1.5cm (yes, I know) for the mic. The internal foam is deep and perforated, but only depth wise. If you are cutting to fit around a shotgun mic for example, then it will get messy. I have replaced the inner foam with Kazen foam (as not happy with the result, as in included pics), which is superior for cutting to a tighter fit for mics, lenses, small tool etc. but puts the cost up quite a bit. However, this is just my personal view and experience; the foam will probably suit most people and uses. Just a side not: the cases are stackable, which is great for storage (shelf/cupboard space etc.) reminded me of a miniature Dewalt TSTAK system...Still going to need a bigger case, but have kept both as useful for cameras/lenses/small audio gear.

Using this as a case for a portable ultrasound device. Foam inserts were excellent and adaptable to the device, hugs it to stop it from moving in the case. The case itself is extremely sturdy and looks up to the job. The clasps are heavy duty and firmly close the lid. I believe it is IP65 rated to protect the contents from water. I'll give it a little while but then will probably purchase more to protect some other devices.

Great protective case, just what I was after for taking my micro 4/3 camera on holiday. Enough room for the camera body, with pancake zoom lens, and an extra lens. Fits in my rucksack easily. Case is very sturdy, built like a tank!

Bought this to house a thermal imaging camera works well and super strong

I bought this for an endoscope with a screen. Im a builder and cant just have it rolling about in my van. The foam insert was easy to fit to the shape with rip out cuts already on it. Now my scope is protected from scratches. The case is sturdy and up to take a few knocks. Well worth it

Bought for a place to store my folding knives this works perfect to store around 7-8 average size knives depending on orientation/arrangement. Its very sturdy and the foam is nice and firm and easy to pluck to fit your items. Overall its pretty good value for money if it had been a bit larger it would be 5 stars all day long.

I have not tested the case for waterproof-ness and I own it only for a short while, therefore I don't know whether it is durable. However, for the few days that I have it, I like it, and I expect it could withstand a heavy rain (walking home in a monsoon rain made me look for such a case, actually). It looks sturdy and has foam rubber inside. I took it on travel now for my usb, cables, glasses, etc. – all those small things one seems to need these days; at least it looks more cleaned up to have one such case.

Prima koffer die de concurentie met die van het andere merk goed aan kan. Het prijsverschil is op het eerste gezicht niet zo groot vergeleken met de kleinste van dat andere merk. In deze Navaris case zit echter wel plukschuimvulling wat je bij dat andere merk moet bijkopen.Bovendien is de case ietsje groter. Toch nog een aanzienlijk prijsverschil. Ik raad zeze koffer zeer aan.

Una maleta rígida, perfecta para proteger tu equipo de fotografía. Totalmente resistente a golpes y caídas perfecto para proteger el contenido de su interior. Además cuenta con una espuma interior que es totalmente personalizable por lo cual es perfecta para poder adaptarlo a cualquier cámara, equipo portátil, cargadores .... La calidad de los materiales es muy buena, se ve que están hechos para durar, cuenta con un asa y dos cierres de clic lo cual lo hace seguro, cómodo y práctico de transportar. Le doy cinco estrellas ya que el producto en si me ha sorprendido para bien, totalmente recomendable.

Ottimo prodotto, validissimo qualitativamente e rifinito in modo impeccabile. Protegge da ogni cosa (certo non da carri armati) quanto di più prezioso si possiede è si deve trasportare. Io lo uso per strumentazione laser

This case will give me the protection and padding for my electronic test equipment. I have a small RF network analyzer which I needed to protect, and this will hold the analyzer and connector. Padding is great.