NB-2PCS(Blade)

Excelente

After reading some of the critical reviews I almost did not order this kit, in fact I was so fearful I purchased the used item. The plastic gear on my blender broke off but the middle brass cap was still on the blender. You can not install a new gear until you unscrew that remaining brass cap from the old gear, it does not sit on it is a screw on gear. So I had to remove 4 screws from the the bottom that revealed the flat head screw in the middle of the fan blade. You have to insert a flat head screw driver in order to stop the old brass cap on top from spinning, and turn the brass cap with a locking pliers to the RIGHT , not left, opposite of the normal, turning right unscrews it. OR you can hold the brass cap on top with the locking pliers and turn the flat head screw on the bottom to the right. It was hard at first because small part of the clear plastic gear was still stuck on the brass cap and i had no way to send a small bursts of W2 to the threads. So I burned the stuck plastic piece with my curling iron and pried it off with a flat head screw driver and put some W2 on the cap that was now hallow, I tried it again and it unscrewed without an effort, I screwed new gear on turning left, it is as good as new. Some people mentioned seals were not on the blade holders , but the ones I received had seals pre-installed on them plus the 2 extra seals. I used one of the seals on my old blade holder it seemed impossible at first but once I soaked them in boiled water for five munities it was very easy to put on and I did not have to remove the blades. The trick is once the seals soaked in boiled water and I don't mean hot water I mean boiled water, you have to snap them on really fast because silicone cools off and shrinks back really fast, which is a good thing that gives you a very tight seal that is not coming off anytime soon. I really can't tell the difference between the original and the replacements . I certainly hope they last longer than the original. So far everything functions like as if it was new, yes I recommend this product even at the new price of $21.99 is a great deal! UNLESS if you find the similar kit lower priced somewhere else get it there, installation will be the same.

full sized nutri bullet, fits perfect. never had a leak, and does same as original parts

It fit my Magic Bullet nicely and blended thing well. Sadly, they started leaking around the blades which renders the blender useless. This is what happened with the original blade assembly as well. They lasted a couple months, maybe 10 weeks after I started using the unit again.

Por fin puedo reemplazar todo en mi máquina que estába liquidando

Works great for a replacement

Both of my blender bases were cracked on my Nutribullet, when my plastic gear on the motor exploded I thought this thing was done for. Then I found this set. For less than $20 my Nutribullet is back better than ever! Pretty easy install for the mechanically inclined. Thanks to the guy that recommended unscrewing the bottom screws then using a flat head screw driver on the bottom screw while CLOCKWISE unscrewing the left over metal adapter on top with pliers. The bottom flat head screw does not look like it would accept much force, but luckily it didn't need much. Easy Peasy.

practicas muy buenas y duravles

El producto tiene buenos acabados y lo mejor que puedes desarmar el aspa, aparte incluye los repuestos de la contra de vaso y protectores de tornillos de la base,

Me gustó que trae las gomits de silicón y los repuestos del rotor

Llego con todos sus accesorios que indica en la foto de venta, pero al revisarlo veo que el tubo que sostiene las aspas es mas largo que el Original y le falta una pieza que el Original trae, esa rondana de plástico. Las 2 primeras fotos son del Repuesto y las Otras 2 son del Original.

le queda a la perfección

Buena calidad llegaron muy rápido, conforme con la compra