FP2620W2-R Pro Connected Wireless Smoke alarm - Battery

I'm an avid user of home assistant and IoT, hence the reasoning for looking at connected devices. Appreciate this is pricey and requires its own proprietary hub, but the piece of mind that no matter where you are, you'll get an alert if an alarm goes off to me is worth it. It also routinely tests the network and system to ensure all is working as expected. Super easy to install with various sized holes in the plate for drilling, and then just twist and lock the alarm which automatically turns it on. Had for a number of months now and no issues with connectivity or false alarms, also connected to a FireAngel CO alarm and an upstairs FireAngel smoke alarm which will all trigger each other if alarming. I would like to see an API for integration into Home Assistant / Home Kit etc. But can't fault the product. You pay for what you get, and in this case its a very reliable and first-class alarm which shouldn't be compromised

I wanted to interlink the smoke and heat alarms in my house without having to lift floors etc, I ordered two fire angle R pro 10 year battery smoke alarms and a fire angle R pro mains powered heat alarm, the alarms were well packaged and all fitting instructions were Easy to follow , all the alarms paired easily through the house WiFi and all are working perfectly. I am happy with the alarms and intend to buy more fire angle alarms for the rest of my house

These are great, and I really want to give the 5*, but I can't - not quite. I've got three. They are relatively easy to install - just screw the base to the ceiling and clip in. Takes minutes. However, they essential function is to link them so they all alert together - that's what you pay the extra for the Pro version for. It took me a couple of hours of frustration and a call to their helpline to confirm that they were linked properly. The linking procedure seems fairly simple, but on testing them I got variable results - sometimes the other alarms would sound, sometimes not... The trick, it turns out, is a very subtly worded part of the manual. Once linked, when you test them, you need to just dab the button on one VERY briefly. If you do that then they will all sound the alarm. However, if you hold down the button for more than the briefest moment, the test applies only to that alarm and the others won't sound. Until you know this, testing them is darn near impossible. I even returned one as faulty before I learning this as I was sure it wasn't working (it probably was - just that the test procedure isn't crystal clear). To be fair, in some ways the lesson is to read EVERY WORD of the manual, but frankly this is an important aspect so they really should have made this much clearer in the manual.

I bought a bundle including gateway, several optical alarms, a thermal/heat, and a CO detector (May 2021). I later added another CO detector and optical alarm. Fitting the alarms and connecting them all together was fairly straightforward, and initially worked fine. Barely a year later, one of the smoke alarms started chirping to say that the battery was failing. That then stopped and didn't occur again. A couple of months ago, the CO detector in the kitchen started continually alarming. I brought the second CO detector in from the garage and sat next to the kitchen detector. The kitchen detector continued to alarm intermittently whilst the other was silent. Today the living room optical alarm has constantly been sounding whilst I was in the room, even after using a hoover to ensure the sensor didn't have a dust build up it continued to go off. I'm now about to rip the whole lot out and replace with something more reliable. Pros - easy to set up and link together. When one alarm goes off, all the other do Cons - Zero confidence in a system that triggers all alarms on a false basis. 07/03/24 - Less than three years on and that's the last of all of the FireAngel "10 year battery" bundled products that I bought have now died. What an investment! Have replaced with an alternative big brand that I can at least change the lithium batteries on.

With the clear instructions, it was easy to set up and fit in the correct position

Bought a gateway to manage my existing 7 alarm setup in the house. Took some time to find instructions and download the app. Within the app, registration challenging - kept on refusing to accept my details with no error message. Inexplicably worked at the fourth or fifth attempt. Managed to register the gateway on the app, but the app won’t let you connect to an existing network, you need to do this via the web based installation “wizard”. I didn’t want the hassle of taking down 7 devices and reregistering them so went to the “wizard” Logged in, found my account, but then anything else resulted in “Oops - Something went wrong. Please refresh this page to continue” Tried another browser with the same result, so called the helpline. the lady who answered couldn’t help, referred it to someone else and came back to me an hour later saying they don’t know why this happened and I need to individually pair all 7 alarms again through the app. Awful experience so far. Need to wait until the dogs are out on a walk to repair all the devices as the noise distresses them

Great fire alarm. We have one in every room and they are all connected so if one goes off, they all do. We also purchased the hub which alert your phone if a fire alarm goes off which gives you some piece at mind when out and about or on holiday. The alarm isn’t too sensitive, we have one in our kitchen and doesn’t go off when cooking.

Good product and great after sales service.