Size:17.7''×236'' INSTRUCTIONS FOR USE: 1.Sand down rough surfaces prior to sticking. Clean large surfaces with mild soap and water. 2.Measure the surface you want to cover. Cut the paper into right size, leaving about 3cm extra overlap on all edges is better. 3.Remove a small portion of the backing paper and attach the edge of the contact paper to the surface . Then press from the center to the edge with a towel meantime eliminating the remaining backing paper little by little. 4.If there are air bubbles after attaching the contact paper, use a needle or the point of the knife to get rid of them. WARM PROMPT: 1.Make sure the surfaces is clean, dry, flat and smooth enough before sticking. 2.Do not to remove all the backing paper at once when you paste it or it will stick to itself. 3.Color tones can vary due to lighting in the room, pictures on wall for reference only. 4.Slight odor is normal, smell will disappear after ventilation. 5.Use a soft, flat cloth to apply pressure evenly from the center to the edges to eliminate wrinkles and bubbles, slowly tear off the liner, and paste slowly.
