Instant Smile Complete Your Smile Temporary Tooth Replacement Kit - Replace a Missing Tooth in Minutes - Patented

This kit actually works! I was able to follow the instructions, and the process was easy. In the photo, I circled the molded tooth. I was able to mold it on the first try! They offer an instructional video and directions on how to mold the bead to the tooth, and it has the supplies you need for the mold. The only downside to this kit is the amount of beads. If you have more than 3 teeth missing and want to use multiple teeth in this kit, you wouldn’t have enough white beads, especially if it takes you multiple tries to mold it to the tooth. The mold also tends to stick to the cup when you are trying to remove it from the hot water. I recommend using a standard metal spoon to do this. I also recommend buying the extra white beads sold on Amazon because the beads in the kit aren’t enough for more than 3 teeth (in my opinion). There are enough beads in the kit if you are only using it for 1-3 missing teeth. The good thing about beads offered in the kit is that they immediately go clear and soft after placing them in boiling hot water, which makes it easy to remold if needed. Another disadvantage is the shape of some of the side teeth. The teeth are a little pointy for my liking, but once you put them in your mouth, you hardly notice them. I highly recommend buying this kit, especially if you don’t have the confidence to smile because of missing tooth/teeth! It’s also not expensive at all like those implants or partial dentures. The kit is also great as a temporary measure if you have to wait for your dentist appointment for dentures or implants.

I recently had a 3 tooth bridge come out. It consisted of one of my front top teeth and the 2 teeth next to it. I cant afford to buy 3 individual teeth implants so after watching this products video and reviewing it, it seemed like an easy, inexpensive, temporary fix. It says in the instructions that you can use this for replacing just one missing tooth or several such as in my case. The first thing I found out was that after you dump the beads into the boiling water and they turn clear and you fish them out with a spoon, the texture is soft like it shows but there is no "sticky" to it AT ALL. The fake teeth sent with the kit are super micro thin practically flat. The video shows him cut off 1 of the fake teeth, ball up a very small amount of the "softened bead material" and applies it onto the back of the fake tooth then he just sticks it into the space where he's missing a tooth and it fits perfectly and stays put. No way that will work. If you still have part of your tooth root in your gums, there wont be a way to push this thing up into a hole because there's not going to be a hole to push it into. Or if you broke your tooth off and you had a dentist pull the rest of it out, the dentist is going to close the hole with a couple stitches and in 1-2 weeks there wont be a hole anymore. This softened material doesn't stick to your gums nor does it stick to the backs of the teeth on both sides of it, nor does it stick to the back of the fake tooth like they state in the instructions. Yes it will harden back up once it gets cold but again, no stickiness to use it as adhesive. I got no use out of it at all and ended up throwing it all in the trash. Dont waste your hard earned money on this junk!

This saved my smile! The tooth rite next to my front tooth broke out from a root canal that was done badly. It looked horrible the gap between my front tooth and canine tooth was huge, my tooth broke off close to the gum line, there wasn't much tooth left at all, and what was left was brown and black from decay, it looked horrible! loosing my front tooth greatly lowered my self esteem, in so many ways. I didn't want to go anywhere, or talk at all, it even affected my speech a little bit.And because of the covid-19 pandemic I can not find a dentist at all, even the few that are open for emergencies were either booked or would not accept me, because I wasn't their patient. So I went online looking for a temporary tooth. I ordered 4 different products from Amazon at the same time. I waited till I received them all and then I went to work trying each one, hoping to get my smile and confidence back. The other 3 products were just the melting beads with different tools and directions, you have to be some what artsy craftsy to make the melted bead puddy look like a tooth, and fit properly before it hardens. I'm really into arts and crafts, and I couldn't do it, plus all the tooth material from all 3 sets were all way to white and did not match my other teeth and your could totally tell it was a fake tooth. But this set was the easiest and by far the best I was able to color match my teeth, then I found one that looked very similar to my original missing tooth, cut it out filed it to make it perfect. Melted down the bonding beads in water, stuck a little goin to the back of the tooth and stuck it in the missing tooth spot. I pushed the tooth into my gum line, I bit down, so that I would have a comfortable fit with my mouth closed. I used my finger and my tongue to smooth out the back, once I got it in the place I wanted, and made it feel as natural as I could, I let it set in my mouth for a little over 20 minutes without moving or talking to make sure it set correctly. After that I took it out, put it back in and went to show my room mates my new tooth. Everyone myself included says you can't tell that puts fake at all. I love this product. I have had my tooth for about 2 weeks and it's still perfect. Here are a couple too tips don't sleep with your tooth in, you could swallow or in your sleep, or mess it up if you grind your teeth at night. 2. Don't eat with your tooth, I have forgot that I had the same tooth in a couple times and have started to eat with it. Each time after a couple bites the tooth comes out, and I have almost swallowed it on now than 1 occasion lol. But if you have a good fit like I do you will have no problem drinking with your tooth from a straw or a cup. It may take a few trys before you get your tooth fitted just rite, but that's the great thing about this material is you mess up just put it back in hot water and do it again. And the product can be used over and over and over again. Thank you so much for such a great product, this product saved my life

If I could give 0 stars, I would. Terrible and completely useless product. I followed the directions correctly , multiple times, even watched videos on how to. The tooth doesn't stay put no matter what you do. Waste of $20 and waste of my time. You're better off just buying a bag of polymorph beads to form and squoosh into the missing tooth area, let cool, then pop it in and out. That ALWAYS works for me! I tried this stupid product thinking it would be an upgrade. Nope. Trash! And by the way, that's exactly where I tossed it.

Muy realistas

Enligt beskrivning, snabb leverans, tydliga instruktioner mkt nöjd

Je zal misschien meerdere keren moeten proberen om de plastic tand te plaatsen en vast te zetten met de bijgeleverde 'beads', dat zijn harsbolletjes die smelten als je ze verwarmt. Dan kan je ze kneden en zo je valse tand vastzetten, want als ze afkoelen worden ze hard. Maar de kleine hoeveelheid daarvan laat slechts 2 à 3 pogingen toe. Dat je ze opnieuw kunt gebruiken als je pogingen mislukken, klopt niet helemaal, ze hebben dan niet meer dezelfde kleefkracht.

Molto buono, serve attenzione nell'applicare la colla ma il risultato è ottimo veramente!

Bad!!! SO SO SO BAD I was fooled when I placed the order