Delta Cycle Michelangelo

Neat device, but mounting bikes can be a little tricky now that most bikes have very steep top bars on their frames.The bars that hold the bike have bent already, due to being thinner than they should be for a bike rack.

Unfortunately I had to return this. It really wasn't up to holding 2 mountain bikes to be honest. Putting my wife's smaller big on top, whilst thinking would be fine turned into a nightmare. The arms provided just couldn't hold the bike in places and we're actually sliding down the frame and moving. Making removing the bike a nightmare and very close to dangerous. If they could make better arms that wouldn't move then maybe it would be ok, but until then if you have 2 lightweight adult mountain bikes I wouldn't bother. It also didn't feel me with confidence having the up against the wall without using the screw in holder.I ended up going for an MTB Hopper Smile. My word, what a great bike stand. Light years ahead of this stand. Have a look on Amazon, I left a review with pictures.

This thing is great. Sturdy and easy to assemble. I have just one bike (on the upper half of the stand) and I use the bottom to store my gym bag(s). It's stable even with just the bike, I've not needed to use the provided strap to drill/ secure it to the wall. Very happy with purchase, frees up alot of space!

it really does stand up on its own, easy to assemble and has saved a load of room. store an old orange clockwork at the top and a canyon strive at the bottom no problems. seems really stable so much so haven't felt the need to secure it. would be perfect for anyone at uni with more than one bike, wish id had one back then.

This is a great rack. It's very well build and easy to install without the necessity of attaching it to the wall (although I did that just to be sure). Fitting two bikes can be a bit of a hassle but will work. Very good rack if you have limited space.Downside is the strap you can use to attach the rack to the wall. It's very pore quality and it's best to replace it with a bracket.

A good quality product at a great price,very easy assembly holds my fat bike and full suss mountain bike no problem a great storage solution highly recomended

Easy to install. Leans onto a wall to keep it upright.

Bought for husband bikes so much space takes 2 bikes were perfect

He quedado muy satisfecha. Nunca hubiera pensado que en una habitación de 7 metros cuadrados, cupiera un dormitorio, estudio y DOS BICICLETAS. Y con solo un clavo en la pared

I bought the Two-Bike Gravity Stand for $99 CDN, discounted $5 ($105 CDN original cost).My partner and I have a small one-bedroom apartment in a city and 4 bikes. We needed a simple solution to organize some of them, and after studying our space and reviews I decided on this stand.Build quality: 5 out of 10 - machining of parts was not great, pieces didn't fit cleanly but they fit well enough for the stand to be put together. One of the legs that touches the floor is bent slightly more than the other. The small metal screws holding the pieces together do not inspire confidence. The arms that hold the bicycles bend a lot when setting bicycle weight on them. You can see the fit of the tubes in on the lower leg portion in the second picture. One side has a gap, the other doesn't. You can see the slight difference in the bend of the legs as well. As to whether this affects the strength of the stand, I am unsure.Instructions: 8 out of 10 - Simple to put together, but make sure you follow them. put it together, from the bottom up, loosely (don't tighten the bolts. Then make sure the legs are spread apart as far as the bolts allow, and tighten them to get a good leg spread. When the bike-weights are on the stand, you can very carefully move the stand legs a touch wider as well. Just be careful.It has a little screw and nylon tab at the top to secure it into the wall for extra safety. I'm unable to do that because of the stone wall, but I would absolutely suggest using this and perhaps remove the strap and use some thick metal wire or something of similar strength to anchor it into the wall to 1. prevent the stand from falling over and 2. help keep the stand from bending or slouching down if the bikes are heavier and put more pressure on those bent legs.Style/Design: 7 out of 10 - It uses friction to hold up bikes and itself and does this reasonably well. That's pretty cool. The tubes are painted silver and red, which looks nice, but oil from the bike and street muck has already turned the red rubberized hanging hooks black...black rubber would have been better. It's not ugly and it's not exactly attractive. It does what it says. The gear-hooks are a thoughtful addition and great for helmets, headlamps, and more.Value: 4 out of 10 - CAD$100 to $105 is too much for this stand. It would be a reasonable buy at CAD$50 to$75. But at $100 I feel like I paid too much considering the build quality and strength of the parts. As a regular cyclist, I don't see this stand lasting more than a year or two. But I will follow up.My partner and I have heavier bikes on the stand. Mine is a Giant ATX with 27.5 wheels and a Large-size frame, hers is a Trek Neko with an 18" frame and front suspension. Both are primarily aluminum. I would not suggest using this stand with similar sized cheaper steel (chromoly) bikes from your local box store, or steel touring/commuter bikes with lots of add-ons (like racks and pumps and locks which add a lot of weight). Same with full-suspension mtn bikes. They have a lot more weight and I don't think this stand will do well with them. If you have a couple of carbon-fiber bikes, street or otherwise, or modern road road/cyclocross bikes of any type, they should be fine. I strongly suggest attaching/anchoring the top of the rack to your wall regardless.

Muy fácil de armar, me solucionó el problema del espacio de las bicicletas de la mejor manera, solo necesité un desarmador para armarlo, y sugieren fijarlo a la pared, pero lo veo tan estable que no lo considero necesario (ya le estuve moviendo las bicicletas y meneandolas) se adapta a cualquier bicicleta solo con poner los ganchos uno mas arriba que el contralateral. El espacio que vas a ocupar es el de una bicicleta horizontal y listo, la funcionalidad 10, y lo mejor la simplicidad.

**EDIT***After almost 2 years is still standing and rock solid. We didn't make any holes or buy a mat. It won our trust, we love it. We also hang the locks and helmets.**END EDIT**I like the product, it's a great idea, good design, easy to assemble and helps with the bike storage, specially for small places, and if you don't wanna make a hole on your wall.There's a big BUT , we don't feel is 100% secure. It's been a week and it hasn't felt, mostly because the bike at the bottom helps to make it stay in the same place. We did notice the bike rack slids down when there is only one bike at the top, I don't know if it is because of our floor (laminate wood floor), or other reason.Maybe we'll end buying a mat or making a hole, just to be sure it will stay in place. I guess we like it, but hasn't earned our trust yet.

Se monta en menos de 10 minutos de manera totalmente intuitiva: son unas barras que se encajan y sólo se pueden colocar de una manera para que cuadren los agujeros donde van los tornillos. Los enganches donde van las bicis se ajustan a tu gusto, de manera que se puede personalizar la colocación. Quedan súperbien. Fácil y muy útil. Nos hemos comprado otro

wir wohnen in einer Großstadt und hier werden leider sehr häufig Fahrräder geklaut. Aus diesem Grunde können wir natürlich unsere Rennräder nicht auf der Straße stehen lassen und hatten sie bislang immer im Schlafzimmer an die Wand gelehnt. Mit dieser Halterund passen die Räder nun super in den Flur und es wird wieder ein bisschen Platz geschaffen. Die Verarbeitung ist sehr gut und die Stabiltät ist deutlich besser als erwartet! Wenn die Fahrräder am Gestell hängen kann nichts umfallen und man muss wirklich gar keine Angst haben.

I'm happy with my bike stand, with one exception. Unless the bike is evenly balanced, or one hook is higher than the other, the hook arm can slide out of place.This happened on mine, with both my road bikes mounted on the rack. I did have the front arm/hook slightly higher than the rear to even out the bike's stance. Within a couple of hours the front (front of the bike) arm had slid and was almost touching the back arm. Luckily, the bike did not fall off the rack. That that height I'm not sure if my carbon frame would have survived.To make sure this didn't happen again I cut two pieces of 1x2" wood (one for the lower arm and one for the upper arm), drilled a hole at each end of the pieces of wood, and zap strapped them to the hook arm.Now the arms are locked in placeI'd also advise that you to attach the rack to a wall using the attachment strap to keep the stand from moving more than a couple of inches. I'm not saying that the rack could fall over, but it's better to be safe than sorry.

L'ho montato facilmente e funziona bene. Ho tolto una stella perchè dopo due volte che mettevo e toglievo la bici, la copertura in gomma di uno dei sostegni per la bici, si è disintegrata...eppure uso gentilezza nel togliere e mettere (ho cura della mia bici.) la Bici pesa 15 kg...forse troppo pesante ? Mah. Complimenti come sempre alla puntualissima consegna da parte di Amazon sempre da 5 stelle.

Simply the best small apartment bike rack. Doesn't injure walls, and steadily holds two hybrid bikes, helmets, locks, cables, bike pump, and other biking odds and ends. This bike rack is dead simple to put together and opened up a lot of space in my small Toronto apartment due to the rack's tiny footprint. Someone who is short may have a hard time getting a bike from the upper rack but that's expected.At first I thought it would fall over and crush me, but a year later and the bikes have never even budged from their location once despite me running into it accidentally often and the wall behind the rack looks perfect. Comes with an optional mounting kit for the wall, but I haven't needed it.

Es facilísimo de montar y soporta bien el peso de dos bicis. Peeeero, al día siguiente a montarlo y poner las bicis, las gomas de los ganchos donde están colgadas las bicis se han roto... simplemente por soportarlas...Igualmente es una buen invento con el que se ahorra mucho espacio.

Quize guardar mis dos bicicletas en mi estudio. Consideré varias opciones, incluso construir algo de madera, pero al cabo me di cuenta que el costo de materiales y el tiempo serían más alto que el precio de este soporte, así que lo mandé a pedir. Me ha gustado mucho. Lo conecté a la pared con un solo tornillo. Mantiene las dos bicis sin problema y se ve bien padre. Lo recomiendo.

es un producto muy comodo se puede sujetar a la pared, es para mantener en orden las bicis, ya que las tenia de cualquier manera, asi las tengo ordenadas y bien puestas y no me ocupan tanto espacio en el garaje

Soporta muy bien las dos bicicletas, es muy estable por lo que al retirar cualquiera de las dos bicicletas, no importa si es la de arriba o la de abajo, sigue quedando muy firme. El diseño es muy discreto por lo que en cualquier lugar de la casa se puede colocar sin que desentone demasiado.Solo un detalle con los ganchos, hay que fijarlos con alguna cinta o cincho para que queden en su lugar por que es muy fácil que se muevan, y más los pequeños para accesorios, esos se mueven con apenas tocarlos

Entrega muy rápida y en perfectas condiciones. El soporte es estupendo. El montaje sencillisimo, menos de 4 minutos. Es robusto y los soportes para las bicis cumplen bien su funcion y, aunque parecen frágiles, aguantan bien. Efectivamente no necesita sujeción alguna. El apoyo en la pared con las bicis es más que suficiente.Sin bicis es fácilmente transportable si decides cambiar la ubicación. Incluso creo que podría llevarse en el coche desmontado para colocar las bicis en cualquier lugar de vacaciones si se viaja con ellas.A falta de ver su duración en el tiempo, pues lo acabo de instalar, el producto es muy recomendable.

No drilling into walls required, stable, and easy to assemble. Top bike is 44cm frame and bottom is 50cm frame. 85" from ground to top of bike.Tip: if the top bike's wheel is touching the bottom bike, just rotate the pair of hangers 45 degrees to either side to get more clearance in the middle.Accessory hooks are absolutely garbage though, they are too big and simply fall off the bracket. Expect to throw them out with the packaging.