

❄️ Snap in cool power, drive like a legend.
The aFe Power 54-72203-S Dynamic Air Scoop is a precision-engineered intake upgrade for 2015 Dodge Challenger models. It channels cool ambient air from the factory headlight inlet directly into the intake system, enhancing engine performance without any vehicle modifications. Constructed from durable cross-linked polyethylene and inspired by the Hellcat’s design, it fits both factory and aFe Momentum GT intake systems for a quick, hassle-free installation.
| Manufacturer | aFe Power |
| Brand | aFe Power |
| Model | 54-72203-S |
| Item Weight | 1 pounds |
| Item model number | 54-72203-S |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | 54-72203-S |
| OEM Part Number | 54-72203-S |
J**E
Easy install
Good product
J**E
2019 scat pack challenger does require modification
Does fit a 2019 challenger scat pack with hellcat lower box. It does require about an inch to be shaved off. Basically it pushes the air box right up against the coolant reservoir. You shave enough back to where it can fit over the light cover but doesn’t have tension pushing the right side of the box. After about 3-4 test trials there was a sizeable gap between the box and coolant reservoir and when I felt comfortable I just put some foam tape on the side of the coolant reservoir just in case the box moves from what ever to prevent it from rubbing through
E**I
AFE makes quality parts
If you have a Challenger that is newer you have to order the short tube that AFE makes. This one will not work as it's too long and pushes the airbox back too far. The short one works perfectly
N**E
probably good for a hellcat
probably good for a hellcat. it's pretty difficult to modify this thing to fit a scat pack with a hellcat airbox. with this thing installed the airbox pushes up against the coolant reservoir making it impossible for either the airbox or coolant reservoir to sit properly, it's just too long. maybe a hellcat coolant reservoir would fix this issue. i tried cutting the part to fit, but the bend makes it basically impossible to do so while maintaining the correct angle. i'd recommend getting a completely different part, maybe just use generic flexible hose or a rubber headlight intake tube. i ended up just modifying an OEM tube and the bottom intake of the airbox doesn't seal against the hole at the bottom of the engine bay as intended. eventually i'll replace it with generic tubing.
R**Z
Great improvement
I bought the AFE headlight air scoop for my 2017 Challenger SXT and it was a well spent 46 bucks. I installed it today and It does give the car a great improvement when accelerating. It doesn’t turn the SXT into a hellcat but it does make it go faster. I also noticed the sound is like a hellcats rumble when taking off or making shifts but 90% quieter. It’s like I’m starting to awaken the inner hellcat out of my sxt. Next purchase will be the AFE Cold air intake!!
D**J
Does not fit a scatpack
This thing was a b#*#% to put on and quickly realized it was the wrong part for my scat It didn’t fit out the box. There’s a shorter one you can use so don’t buy this one for a scat it won’t fit unless you modify it.
E**1
Works Great With My AFE Momentum GT CAI
Easily installed on my Cold Air Intake box, since it's from AFE too. I have a 2012 Challenger with VLAND headlights, with the removable air intake cap. I did have to cut off the ballast mount on the bottom of the left headlight housing to make room for this, but that's not an issue with this product.
A**R
aFe Power Intake Tube
This is a fantastic product; however, this is too short for the 2015-2017 models and barely fits on my headlight. As well, for $55 it could have come with a bigger locking tab instead of the small streamline design they were going for. aFe makes fantastic products, but a little R&D could have found out that they 2015-2017 models need a little bit more length to properly fit and designed a secondary tube accordingly.
TrustPilot
1天前
2 个月前