ENEACRO 1-1/4 Inch SDS-Plus 12.5 Amp Heavy Duty Rotary Hammer Drill, Safety Clutch 3 Functions with Vibration Control Including Grease, Chisels and Drill Bits with Case

While working as the property manager for our neighborhood HOA, it fell on me to repair the security fence around our swimming pool. Several of the chainlink fence posts had rotted out flush with the concrete. Post anchors were the perfect solution, but each required four holes to be drilled into the concrete. A local pawn shop wanted $400 for a beat-up and filthy Hilti hammer drill, but I bought this Eneacro new for a fraction of the price. It did the job well and we wrote it off as part of the repair cost since I never expected to need it again. Three years later and I needed to replace the posts under my deck. There were eight posts and each post base required four holes drilled into the existing concrete piers for anchors. I dug out the Eneacro and it worked flawlessly, with each hole taking 20-30 seconds. The packaging and extras are also very thoughtful. Molded case, comes with some SDS Plus drill bits and chisels to get you started, an extra set of armature brushes, grease for the hammer mechanism, and a tool to remove the grease cap (similar to an angle grinder wrench). I've only used mine twice in three years but it seems to be a quite well-made and powerful tool. I can't speak to the longevity, especially in professional applications where it will be used daily, but the extra set of brushes suggests that the manufacturer expects it to last for quite a long time. Very impressive for the money.

Great tool , worked far better than I expected. Great price for a rotary hammer. Already used the supplied bits on 50 year old concrete and still in ok shape after close to 100 holes. Wish I would’ve bought sooner and saved myself several headaches .

This is a really good value for the money and it worked great. The only issue I've had is that aftermarket bits fit, but are difficult to get in and out of the shank. The bits that come with worked great. I wanted a wider bit to remove mortise on a tile repair job.

Disclosure: I am supposed to get a 10-piece screwdriver set from EneAcro for writing this review. So, here we go: I bought my ENEACRO 1-1/4 Inch SDS-Plus 12.5 Amp Heavy Duty Rotary Hammer Drill on 10/3/2020. It arrived in a few days, just as expected. The hammer drill is not really light (16.4 pounds according to the description), but the 360 degree handle which can be easily adjusted, makes it easy to hold the hammer drill tightly. The delivery also came with a nice case, 5 drill bits and lubricant. I have used the EneAcro to drill about 60 holes into the granite siding of my house to attach new shutters. This was not so easy but the EneAcro is a very powerful tool and within 30-60s each hole was drilled. Because I am new to hammer drilling I melted two of the drill bits they sent in he process. I then bought a Bosch high-quality drill and I also damaged that one, but managed to drill all the holes by that time. There is an interesting feature that did not make 100% sense to me: The EneAcro has 2 switches (one for turning drilling on/off, one for switching hammering on/off) for only 3 functions (drilling, hammering, and drilling & hammering). But since I always used drilling & hammering that did not really matter to me. One minor thing I would improve is the instruction manual (which is important to newbies like me): Some of the pictures have inserted numbers, but I am not sure where they are referenced (it’s not the exploded view, at least not all the time). It seems the manual uses the term “chisel” synonymous to hammer drill (“switching the chisel on/off”) which I am not familiar with and I also did not know what a “hex housing” or a “chuck body” is, and the chapter “Three function” on page 10 would benefit from more details, I believe. So overall I believe it’s a great tool and I feel it was a good purchase, but because of the documentation I only give 4 stars.

For what I spent ($109) and what other name brands cost, I believe THIS IS THE ONE you should purchase! I tried it.. used it.. read all the reviews and noticed there was an issue with the grease application after a couple uses.. I bought an extra grease tube (Makita brand- 3 oz- small on Amazon for $6).. thank goodness that I did, but next time I'll go to an auto store and purchase a tube (15 oz) of grease for $5.. I used the tube of grease it came with (3 oz) and the other tube (3 oz) I purchased which was just enough to fill the grease trap/cavity/catch.. IMPORTANT NOTE, use the drill in diff. Modes for like a couple drill holes - 5 min.. open up grease trap- push down grease/add more grease/ REPEAT 2-3 times- I did this until both tubes were gone... this is how you load the grease WELL before heavy duty work in a new SDS Rotary Hammer- FYI. Great purchase; great value; construction grade; enough punch to do the job!! I am a Residential Contractor for over 15 yrs and have never heard of this brand, but will give it 5 stars if you follow the grease application steps before use. Very well made, comes with drills, chisels and punch.. would recomend buying a complete concrete set with 10"-12" drill bits, but that's a personal option for what you need to get done. This is the drill for me and will keep it in good shape for years. 5 stars Eneacro!!!!! Enjoy :-)

We had to break up our basement floor to replace a bad drain. It may not hit as hard as more expensive drills, but it definitely broke up our concrete floor that was 2-4 inches deep. This drill costs less than $100 and renting one from our local rent-a-center charged $75 a day. And that's the value of this little drill!

Used it to take down a full stone fireplace. Worked great. It's not light, but it sure works well.

It was a gift. Purchased and rated based upon product review of actual product users.

es un producto muy potente y en relacion desempeño calidad y precio, la verdad ecxelente calidad y bajo precio, me dejo satisfecho con los trabajos realizados en comparacion a otros equipos que habia visto con amigos. lo recomiendo ampliamente.

I'm not a contractor but I had to drill into my foundation for concrete screws and washers to attach wire mesh for stucco. On two sides of my house I did a couple years ago I completely burnt out two 1/2" hammer drills, one was brand new and one 1/2" I had for a couple years. Now doing the back of the house with this rotary hammer had no shortage of power, the only issue I had was drill bits breaking in the 35-year old super hard concrete. Buy quality concrete bits and this hammer drill will do the job all day long..

Wow damn this thing is a work horse put other drills to shame

Este es un producto con buena relación calidad precio yo lo he ocupado en perforar y sin hacer fuerza realizó el trabajo, los plásticos son buenos. Lo único que no me gustó es que el sistema de amortiguador es muy rígido y se ciente el golpe de martillo en la mano. Fuera de ahí buen producto

Excellent product. I was skeptical at first. Hammer and hammer drill both are exactly what I needed to drill and hammer the asphalt and concrete. It did the job without any problem. Highly recommended if you need to rent the tool more than once. It pays for it self.