CRL Nickel Plated Adjustable Mirror Clip set for 1/4 in (6 mm) Straight Edge Glass - Package

My existing bathroom mirror used these mirror clips so there was no mystery on how to install them. That was fortunate, as the instructions weren't perfectly clear. I bought this new set instead of scraping two layers of paint off the existing set when installing a new mirror. All four clips are adjustable. It would be simple to have a non-adjustable set for the bottom clips but that would require different manufacturing tooling. Instead, the bottom clips are made non-adjustable by installing mounting screws through the base AND the sliding clip. For the top set, a mounting screw is only placed through the base, so the clip can be moved up to clear the top of the mirror and then pushed down to engage the top of the mirror. Hopefully, the attached image explains it. I used drywall screws for the base and the supplied screws to pass through the base and clip on the lower clips. I did trim down the supplied cardboard anti-rattle shims so they weren't visible outside of the clips. The install of a new 40" x 48" mirror was a piece of cake after ensuring the bottom clips were leveled and the upper clips were mounted high enough to be above the mirror when extended. I pre-installed the lower shims before inserting the mirror and then slid in the upper shims before sliding the clips down into position. Having a second set of hands definitely helped.

These were nicely made, and super easy to install. I was installing my mirror on a thinner closet door, so had to buy a shorter screw for that, but it worked great! They perfectly fit 1/4" thick glass - not sure why some reviewers said they were too big. I trimmed down the cardboard pieces that keep the mirror from scratching - they are oversized and don't look good that big. So I trimmed to fit.

These were great. Used for mirror with no frame. 5ft x 7ft. Unfortunately the wall was unknowingly not completely level and mirror broke from other stressors bc this was for my home gym. I believe it'd still be holding the big heavy mirror if I also used an adhesive for the mirror to stick closer to the wall. I will be trying these again. User friendly tho Idk what the little cardboard inserts were used for. Didn't work for this project in particular.. do recommend stronger/longer screws if using to hold significant weight

These are super easy to install and use. My application allowed the mirrors to rest on a granite backsplash thus only the top mounts were needed. One large mirror took two people to lift into place with only two clips to hold it there, because the weight is resting on the backsplash. I preinstalled one on a stud and used a drywall anchor for the other. To use, set the clip in loose, lift the mirror into place and simply push down on the clip to hold the mirror. As others have mentioned this design creates a small gap between the wall and the back of the mirror. If that will bother you get a different mount. That's why I gave it 4 stars. It does bother me a little but I'm not going to change it. If it won't bother you this is a good clip, easy to install and use and creates a pleasing look when installed. Added plus, it is very easy to undo the top clip to remove the mirror if you need to.

works great on all the mirrors I hang for customers and look good. Easy to use.

Wery happy with a product, easy to use and install. I like the fact i can adjust the clips for installation or when removing the mirror just slide locking pins up and you can take down your mirror

Super ,muy fuerte y ajustable

I had my reservations, but was pleasantly surprised by the ease of installation. After getting accurate and level measurements on the bottom clips, the top ones were very forgiving for mistakes. Just be sure the top of the bracket is not higher than the top of the mirror. You can always have the clip up a little. You don't need to slide in the clips at the top til the mirror is in place. We didn't need the cardboard inserts. Despite a little room, the mirror stayed in place perfectly and looks flush with the clips and close to flush against the wall. And the clips are more of a brushed nickel color not the copper the picture shows.