3D Printing 3D Printer Adhesive for Adhesion to Heated Print Bed, Spray, 400 ml 13.52 fl oz

I started using 3DLAC for my ASA and TPU prints, and it’s been flawless. No more warped corners or failed prints—the parts stay locked down from start to finish. I just spray a little more where I’ve removed parts and keep printing, only giving the build plate a good cleaning every ten prints or so. It’s simple, reliable, and saves a ton of time and wasted material. I do wish the nozzle had a finer mist for a bit more control, but that’s minor compared to how well it works. Overall, this is a great find—high quality, dependable, and well worth the money for the print quality it delivers.

This stuff is actually amazing. I thought I was just terrible at 3d printing. It was so hard to get things to finish. I would tweak the setting on everything. Bed temp hi, low different filaments but never tried another glue since I thought they were all the same, whoops. Since this stuff was delivered I have printed endlessly and haven't had a single break from the plate. I love the spray instead of the roll on. The spray amount is perfect and covers the plate with one swoop. It just works. My 3d printer has come alive again and my son is really stoked.

This stuff is great, better than nano polymer adhesive and cheaper too, though I would recommend waiting for this to go on sale if you can. Unlike what some have claimed this isn't just relabeled hairspray, It has better adhesion than hairspray, and unlike hairspray it doesn't degrade even at 120C bed temps. This is the first adhesive that I've tried that works well on bare steel, so no more destroying buildtak/pei/glass beds with prints that stick too well to the build surface. It does need some help with larger ABS and PC prints, I use ABS slurry in addition to this adhesive which entirely prevents warping at the cost of ease of removal. If you're just printing PLA parts, they hold well, come right off when the bed cools and the adhesive lasts for quite a few prints before needing to be reapplied. I haven't used it much PETG, frankly I find it more annoying to print than ABS, but the two prints I have done with PETG have stuck well and released easily when the bed cooled.

Absolutely love this product. I was using glue sticks for better bed adhesion but had to wash my plates after a few prints to avoid too much build up and would leave the prints sticky. This creates great adhesion without a sticky residue. When you let the prints cool a bit before removing they come off super easily. If they cool completely they practically slide off. Also love the fact I can spray a light coat on the build plate, let it dry for a minute or two and start a print up.

The absolute best for every filament i have thrown at it. Even improves bed adhesion for ASA-CF a bit. Won't be buying anything else, i'm now a lifetime customer.

Love it. fast, easier than glue. So far no prints detached after +50 times used. I don't always wash plate between uses and no detachments. Strong odor for a few seconds, need to let plate cool once done, otherwise hard to get piece off. havent burned through a bottle yet despite +50 prints including tall and thin prints.

This stuff is fantastic on a textured PEI plate - the standard plates on both my Anycubic Kobras and my Bambu H2D. It is a little less effective on the smooth patterned plate with the holographic effect, but that's okay really. I use a different formula for those that works quite well. It does not leave a sticky residue on the plate, although sometimes afterwards I can feel it a little on the print. It easily cleans up with warm water or rubbing alcohol. I've used it with PLA, PETG, PA-CF (nylon carbon fiber), ABS, and ASA, all with success. the latter three were in the closed environment of the H2D. I will probably purchase it again when the bottle is gone, but it is lasting a long time. Does not really need to be applied every single time, maybe every other or third print. I also don't wash it off each time either and it hasn't really built up or anything.

bought this from a recommendation in a facebook group I'm in and i tell you this I havent had any adhesion issues since i started using it this stuff is awesome and will always be at the ready for my prints.

Ich hab den 3DLAC Sprühkleber (400 ml) über mehrere Druckjobs hinweg im Einsatz gehabt, und wenn es um eines der stillen, aber entscheidenden Helferlein im 3D-Druck geht, dann fällt dieses Produkt ganz klar in die Kategorie „macht, was es soll und zwar zuverlässig“. Was ich sofort mag: Die Handhabung ist einfach und vorhersehbar. Leichtes Aufsprühen, kurz trocknen lassen, und das Filament haftet sehr gut – gerade bei PLA oder PETG spürt man den Unterschied, wenn die erste Schicht sauber und plan am Bett sitzt. Kein lästiges Nachjustieren der Druckbetttemperatur, kein „Ränder heben sich, Mitte bleibt kleben“-Drama mehr. Gerade bei großen oder flachen Drucken ist das ein echter Komfortgewinn. Der Sprühnebel verteilt sich fein, ohne gleich eine nasse Pfütze zu hinterlassen. Das sorgt für gleichmäßige Auflagefläche, ohne dass man hinterher Stunden mit Reinigen oder Abkratzen verbringt. Und falls doch mal zuviel drauf ist: Mit etwas Wasser oder einem feuchten Tuch lässt sich das nach dem Druck recht einfach entfernen. Die 400 ml-Dose reicht erstaunlich lang – ich drucke regelmäßig und habe bei weitem noch nicht die Hälfte verbraucht. Das ist angenehm, weil man sofort merkt: So ein Helfer wird nicht zur Einwegware, sondern bleibt länger im Werkzeugkasten. Fazit: Ein solider Sprühkleber für bessere Haftung auf dem Druckbett, der zuverlässig und ohne großes Gefrickel funktioniert. Besonders bei anspruchsvolleren Drucken oder wenn du öfter mit Materialen arbeitest, die nicht von allein anbetten wollen, kann 3DLAC wirklich den Unterschied machen zwischen „läuft sauber“ und „Stop-Spiel“. Im 3D-Druck zählt die erste Schicht oft mehr als alles andere – und dieser Sprühkleber sorgt, dass sie nicht zur nervigen Hürde wird.

Très bon produit. Je n'ai plus de soucis d'adhérence avec mes impressions, surtout celle avec une base plus large et fine comme le Hueforge.

3DLac, que decir de esta laca para evitar warping en la impresión 3d, y tener primeras capas bien hechas. Yo que tengo bandeja PEI Texturizada ya que dice en una esquina que use pegamento. Y con uno en spray, gastas poco, dura mucho, y tiene muy buenos resultados. Y si te lo venden en packs baraatos, BBB

Tutto ok

Envoie rapide