AIMADI Pull Down Kitchen Faucet with Sprayer,Commercial Single Handle Stainless Steel Brushed Nickel Kitchen Sink Faucet with LED Light

So the light is cool. Unnecessary, but cool. Something else to talk about this holiday when the family comes over and asks what's going on with our sink. More importantly, this has the look and feel of a faucet that you would think should cost at least twice as much. The pot-filler arm swings freely behind the spray arm so that you can move one without worrying about hitting the other. Even though it is short, it just reaches the corner of the second sink, so you can fill that one without having to use the sprayer. Pressure is fantastic compared to the unit we replaced, even after running the water full-hot for extended periods. Presume this has washerless valves, because there is a very positive feel to the off/on with none of the "squishiness" you get from a rubber washer valve. The spray arm detaches easily from its holder, and has a locking mechanism for hands-free operation if you want to fill both sinks at once while you do something else. Even with both spigots running, there was only about a 20% decrease in flow. If you have ever worked in a restaurant, you will recognize the sprayer mechanism. It is easy to operate with one hand, and the tension on the flexible spring (which returns the sprayer to its holder) is perfect. As for installation, I agree with the reviewer who advised assembling the supply tubes to your plumbing before mounting the faucet. We replaced some of the under-the-sink copper pipe with PEX tubing which we pre-fit to the faucet, then joined to the copper with sharkbite shutoffs. Simple, easy, reliable, and well worth the expense and effort.

Although we were a bit skeptical we bought this based upon all of the positive Amazon reviews. Although it's too early to know how it will hold up long term, our initial perception on the quality and aesthetics of this faucet is that it is a high quality faucet that rivals name brand products costing 4-5 times more. It looks beautiful, feels solid, and the water pressure is improved vs the American Standard it replaced. My wife loves it! The color change on water temperature does work but for us that's more of a gimmick rather than a needed feature. The install instructions are a little lacking, which is why I docked a star on "Easy To Install". In fairness it is easy to install if you know basic plumbing. It took me less than an hour to remove the existing single hole faucet and install this faucet in a granite countertop. The advice from prior reviewers to pre-install the braided water hoses onto to faucet taking note from the instruction drawing which is HOT and COLD before dropping in the faucet was a must for our install. Also, the accessories section of the instructions refer to an O-Ring, Rubber washer, Nut, and Screw Cap. However there is also a metal washer that's not listed but included and is depicted in a later illustration. I'll summarize the sequence below for anyone who'd like a little extra guidance, but to sum up we are really happy with this purchase and if it would have had a name brand on it we would have not thought twice about it costing a lot more. You may find the following install info useful. I'm going to use the part names and (numbers) provided in the instructions: 1. Insert the black O-Ring (2) into the groove on the bottom of the Faucet (1) 2. Hand tighten the HOT and Cold Hoses (6) onto the Faucet (1). Do your twisting/threading of each hose as close to the faucet base as possible. Note: the illustration in Step 4 of the instructions indicates which hole the HOT and COLD should be threaded to. 3. Drop the hoses through and thread the brass Nut (4) onto the Faucet base (1) The shorter thread section is towards the faucet. Hand tighten. 4. Carefully drop the faucet into place through the opening in your countertop or sink hole taking care to have the O-ring on the bottom of the faucet sit so that it is centered over the hole. I'd recommend you have someone else to hold the faucet in place at this point until the install is finished so it doesn't shift. 5. From underneath the sink first slip the clear Rubber Washer (3), followed by the brass Washer (no part #) onto the threaded brass Nut (4) and then screw on the Screw Cap (5) taking care not to over tighten it. Tighten the two set screws on the Screw Cap (5) but don't over tighten. Attach the braided hoses to your HOT and Cold water supply lines.

I purchased this faucet in November 2019. it was quite easy to install and, overall, the faucet has worked well since installation. The problem is withe the gimmicky LED lights. They look real fancy, even though the color changes "according to water temperature" as the manufacturer advertises, is a joke. Even that is not the critical problem. Every time the faucet is turned on, the LED lights turn on and a terrible squealing noise emanates from the faucet. Sometimes it can be stopped by turning the water off, then on, then off several times. Other times., nothing will stop it. If the water is at a low flow, the squeal is light, but the harder the flow, the louder the squeal and it can be heard through the entire house. I have tried to contact the manufacturer but with no success. Their 'message center' on their website is also a joke; in addition, they provide no phone number. Buyer beware. Update: After a disappointing experience trying to use their online 'message center to submit a request fro information, I used the provided email and received a very prompt response from the manufacturer's customer service department. I assume their website was having issues the day I tried to use it. They obtained my home address and very quickly sent me a new LED/aerator assembly, which was super easy to install. The new one works perfectly, NO squealing and the water stream is even much better. The noise was the only complaint I had and now that the problem is resolved, I give the faucet a solid 5 star rating!

I love it but my friends and family have a difficult time understanding how it works thats why I am not giving it 5 stars. I keep my faucet set to use the Handle. If you want the water to come out of the Sprayer with the handle there is a tiny knob to switch to put it to this setting and then you have to squeeze the handle for it to run otherwise no water will come out. When not set to the handle mode and you use the faucet when you turn the water on the water will run from the faucet. It truly lights up red for hot and blue for cold. I've had this product for 5 years now and the light still works when you turn on the faucet. I love the look of it in my kitchen.

Very disappointing, was initially very pleased with the tap. Couple of months later the LED stopped working and I noticed water leaking with a tiny hole in the arm of the tap causing limescale, found it very odd, how’s that possible and now I have seen a few more and am very concerned. Tried to see if I can reach out and get it repaired but there’s no option. Writing here in the hope that someone can help.