MIXC 100PCS Drip Emitters Fan Shape with Stake Water Flow Adjustable for 1/4 inch Irrigation Tube Hose, 360 Degree Sprayer Perfect for Irrigation System Watering Kits for Garden Patio Lawn Flower Bed

Worked perfectly has a great pattern, and they all work, unlike some other brands which San Francisco cost more totally satisfied highly recommend.. They work exactly as another video from a customer submitted. The 1/4” lines are great. Flexible but strong which makes attaching to emitters easy.

excellent product

I like these sprayers, you can easily adjust them to 360* spray or turn down to a trickle. Con, I used mine in a raised bed and daisy chained 4 of them them with 1/4" line only to find they require more water. opening only 2 will water nicely, but using all 4 turns them will cause them to trickle unless you have them all attached individually to a main line like a 1/2" hose to allow enough water and pressure

These emitters work very well to provide a nice little fan spray!! Shipping was fast, installation was easy! One thing that is great, they have a 7-inch stem, instead of a 5-inch stem. That allows you to placethen so you have a little more height, or you can stake them a little deeper to make sure they don't move. Flow adjustment is easy, and they provide a perfect measurement of water over time. Be sure to heat the tubing in a pot of boiling water, before you put the tubing on these. As always, the barbs are not particularly fragile. But, it never hurts to be careful. And, tubing is always more pliable and easier to install, when hot.

4 years ago, I bought a bag of 50. They are functional but their connectors to 1/4" tubing are poorly designed. The barb a little too large and its connection to the sprayer is a little too thin. You must patiently wiggle the tubing back and forth to work it over the barb. If you push or wiggle using too much force, you will snap the connector off. The connector will definitely snap in two if you try to work the tube back off the barb. There are other problems with the sprayer. While the flow rate is adjustable, I have found that sometimes I need to try different sprayers from the bag until I find one that turns down low enough to use in a large pot. The spike has broken in half while I was attempting to press it into hard ground.

Work well

This product is both affordable and performs exceptionally well. I have replaced all of my current water spouts with it, as they are of high quality.

As others have noted, these are a tight fit for 1/4" tubing. I wish they would just admit these are metric and a tight fit for US 1/4" tubing; one star deducted for this. I boiled one cup of water and took it out to the garden in a glass 2-cup measuring pyrex to heat the ends. I measured and cut the hose and installed the heads fairly quickly. I have a 3/4" mainline, and have 18 micro spray heads running from the mainline with a 30 psi regulator on one zone. I have them set for a 2' radius to fit the raised beds. A few more might be possible on this zone, but it is near the limit. These heads have a shallow, horizontal cone - flatter than the NDS heads I have. This works well for spraying under blueberry shrubs where there is no groundcover. For this application I like these spray heads better than the NDS. For perennials or groundcover I'd use heads which project the spray higher. Heads are not quite as shown on listing, the connector is horizontal, not angled down. There are smaller increments of adjustment with these.

Fonctionne très bien. Je recommande

The product is advertised to be 7” tall, and also have an angled connector. They’re tiny, not even close to 7”. Blatant false advertising. Waste of a month waiting for delivery.

Works with the rest of my irrigation

Can't get them to connect to tubing. I have bought many others but the male connection is too thick and it won't go into tunes. I'm stuck with something that does nothing.