Eclipse Professional Tools 71-132R Junior Hacksaw Blades - Wood & Metal 6" Blade, 32 Teeth per Inch, 10 Count (Pack of 1)

Very good product 👍👍

First rate blades ! I bought them to kind of fill out the selection of mini blades for my new mini saw . I expected to use these coarse blades more for plastic and wood (softer materials) being the coarsest teeth per inch. Today at work I had to saw some small diameter stainless steel rod. The first time I tried that with the blade that came with my saw that blade didn't survive even one cut. So I thought what the heck a brutal test for these New Eclipse blades but I will learn "what they are made of" as it were. Even though the rod was only two millimeters and these blades 14 TPI (a bit too coarse for the application) these Eclipse blades made cut after cut and were as good as new. Still really sharp when I was finished and realistically this was abusing the blades. I am surprised and very pleased ! These blades could not be better. If they were not hard enough they would have worn out on the extra tough to cut stainless steel rod and if they were too hard the teeth would have easily been broken by snagging on the under sized wire (24 or 32 TPI would have been a more appropriate tooth selection for this small wire). BUY THESE BLADES IF YOU WANT GREAT BLADES. Good product. Thank you Eclipse. PS: one small thing to warn you about. The pins in the ends of the blades were larger than the slots in my saw. I would rather have that than wires that are too small and weak. I took an ignition point file (a very thin inexpensive file) and widened the slots in my saw to accommodate these blades. Worth the effort.

Looks to be a good blade, the only issue I have are that the pins were a little large for my saw. Had to slightly file the saw to get them to fit properly. Don’t if the problem was with the blade or the saw.

Sharp and fits perfect

I have corprel tunnel syndrome in my wrist, which makes it hard to use a bigger saw this works out just perfect. It’ll cut through metal through wood through plastic through PVC pipe. Highly recommend it for DYI projects for people with small hands or for older people like myself.

These fit my saw perfectly. Condition as described. Easy to use. Seem like good quality For my project.

I tried three brands of 32 TPI 6" mini-hacksaw blades, for my BrassCraft T114 Close Quarters Hacksaw: 1. Eclipse 71-132R Carbon Spring Steel Junior Hacksaw Blades (10 pack) $0.72 each blade Blade thickness is 0.017 inches. The pins on the Eclipse blades were too thick, so I could not install them on my hacksaw. Holding the blade in my hand, it does cut the Stainless Steel which is used for Stainless Phillips screws sold at Home Depot. 2. Superior Tools Spare Blades (10) for Mini Hacksaw $0.56 each blade Blade thickness is 0.019 inches. Works well, does cut the Stainless Steel which is used for Stainless Phillips screws sold at Home Depot. 3. Zona 36-657 Mini/Junior Hack Saw Blades (3) $2.20 each blade Blade thickness is 0.016 inches. Works well, does cut the Stainless Steel which is used for Stainless Phillips screws sold at Home Depot. All three of these blades have a wavy pattern along the length of the blade, unlike the original BrassCraft blade. This means they cannot cut as narrow a slot. One conclusion from the above data is that the thinner blades cost more. (The original BrassCraft blade was 0.016 inch in thickness.)

Good sharp blades they are thin but strong haven't broken one yet

Kids toy

Preis Leistung top

Bestelling van een juniorzaag.., klein blijft makkelijk Daar kan iedere knutselaar/hobbyist.., plezier mee beleven.., en neemt maar weinig ruimte in beslag. Bedankt Johan.

Works as required

Useful and efficient. Thank you.